Getting s tarted
Setting up the device
Workstati onErgonomicDevice
When setting up your device, please read the recommendations an d
safety notes in the "Safety" manual.
We recommend that you place your device on a surface which is not slippery. In
view of the many different fin ishes and varnishes used on furniture, it is possible
that the rubber feet will mark the surface they stand on.
Depending on the loca tion of your device, troublesome vibrations and noises
may occur. To prevent this, a distance of at least 10 mm should be m a inta ined
from other devices on casing sides without ventilation surfaces.
In order to avoid overhea ting, do not cover the ventilation areas
of the monitor or the device.
Do not stack several devices on top of each other.
Do not expose the device to extreme ambient conditions (see "
Technical
spec ification", Page 45, section "Ambient conditions"). Protect the
device against dust, humidity and heat.
Operating position
Use the device only in the verti
cal operating position.
12 Fujitsu Technology Solutions
To Next Page
Loading...
