Troublesho oting and tips
Cause
Remedy
Wrong monitor has been set under Window XP ► Restart the device.
► Press
F8
while the system is booting.
Either the Windows Advanced Start Options menu
or the m en u for selecting the operating system
appears.
► If the m en u for selecting the ope rating
system appears, press
F8
.
► Select Safe Mode or Safe Mode with Networ k .
► Go to Sta r t – Se ttings – Control Panel – Di splay
and the tabs Appearance, Themes, Settings
to set the correct values for the connected
monitor as described in the operating
manual of the monitor.
Incorrect setting for the mon
itor in W indows Vista
► Restart the device.
► Press
F8
while the system is booting.
Either the Windows Advanced Start Options menu
or the m en u for selecting the operating system
will appear.
► If the m en u for selecting the ope rating
system appears, press the
F8
key.
► SelectSafe Mode or Safe Mode with Network.
► Go to Start symbol – (Settings) – Control
Panel – Appearance and Personalization –
Personalization and enter the correct values
for the connected monitor as described in
the operating manual of the monitor.
Wrong m o nitor ha s been set under Windows 7 ► Restart the device.
► Press
F8
while the system is booting.
Either the Windows Advanced Start Options menu
or the m en u for selecting the operating system
appears.
► If the m en u for selecting the ope rating
system appears, press
F8
.
► Select Safe Mode or Safe Mode with Networ k .
► Go to Start – Control Panel – Appearance
and Personalization – Display to enter the
correct values for the connected monitor as
described in the operating manual of the
monitor.
The wrong RAM modules have been inserted
► See the technical m anu al f
or the mainboard
for information on which
memory modules
can be used.
Fujitsu Technology Solutions 27
To Next Page
Loading...
