System expan sio ns
For coolin g, protection against fire, an d in order to comply with EMC ( electromagnetic
compatibility) re gulations, you must re fit the slot cover.
2
1
► Slide the slot cover into the slot (1).
► Secure the slot cover in position with the screw (2).
► Secure the cover plate on th e casing ag ain.
► Close the casing (see "
Closing the casing", Page 33).
If you have installed or removed a PCI board, please check the relevant PCI
slot settings in the BIOS Setup. If necessary, change the settings. Further
information is provided in the PCI board do cumentation.
Fujitsu Technology Solutions 37
To Next Page
Loading...
