Getting started
Setting up the device
WorkstationErgonomicDevice
When setting up your device, please read the recommendations and
safety notes in the "Safety" manual.
We recommend that yo u place your device on a surface which is n ot slippery. In
view of th e man y different finishes and varnishes used on furniture, it is possible
that the r ubber feet w ill mark the surface they stand on.
Depending on th e location of your device , troublesome vibrations and noises
may occur. To prevent this, a dist ance of at least 10 mm should be maintained
from o ther devices on casing sides without ventilation surfaces.
In order to avoid overheating, do not cover the ventilation areas
of the monitor or the device.
Do not stack several devices on top of each other.
Do not expose the device to extreme ambient conditions (see "
Technical
specification", Page 45, section "Ambient conditions"). Protect the
device against dust, humidity and heat.
Operating positio
n
Use the device onl
y in the vertical operating position.
12 Fujitsu Technology Solutions
To Next Page
Loading...
