Getting started
Switchin g on monitor and device
In order to avoid overheating, do not cover the ventilation areas
of the monitor or the device.
Depending on the version, the device may be equipped with a main power switch
on the back of the device in addition to the ON/OFF button on the front.
► Switch the monitor on (see the operating manual for the mo nitor).
► Switch the device on. To do this, follow th e instructions below.
1
2
► Turnthemainswitchonthebackofthedevicetothe"I"position(1).
► Press the ON
/OFF switch on the front of the device (2).
The power-on indicator lights green and the device is started.
Installing the software
► During installation, follow the on-screen instructions.
Softwar
e,
Install
ing,
► If anything is unclear reg arding the data you are asked to input, read the
online He lp in your operating system.
You will find more information on the system, as well as drivers, utilities and updates on
the "Drivers & Utilities" DVD and on the Internet under "
http://ts.fujitsu .com/support/".
18 Fujitsu Technology Solutions
To Next Page
Loading...
