Getting started
Connecting external devices
Read the docu m entation on the external device before connecting it.
With the exception of USB devices, always remove all power plugs
before con necting external devices!
Do not connect or disconnect cables during a thunderstorm.
Always take hold of the actual plug. Never unplug a cable by pulling the cab le itself.
Connect and disconnect the cables in the order described below.
Connecting the cables
► Turn off all power and equipment switches.
CordCable,
► Remove all power plugs from the gro unded mains outlets.
► Connect all the cables to the device and the external devices. Please m ake sure that you
always o bserve the safety notes provided in "
Important notes", Page 7.
► Plug all data communication cables into the appropriate sockets.
► Plug all power cables into the grounded m ains outlets.
USB devices are hot-pluggable. T his means you can connect and disconnect
USB cables while your device is switched on.
Additional information can be foun d in "
Connecting external devices to the USB
ports", Page 16 and in the documentation for the USB devices.
Disconnecting the cables
► Switch off al
l affected devices.
Cable,
► Remove all power plugs from the gro unded mains outlets.
► Unplug all d
ata c ommunication cables from the appropriate sockets.
► Disconnect all of the cables from the device and from the e xternal devices.
Fujitsu Technology Solutions 13
To Next Page
Loading...
