System expansions
Installing and removing drives
DriveDrive,Drive,Drive,31/2-inchdrive51/4-inchdriveDrive,
The PC casing can accommodate a total of five drives:
• three accessible drives (two 5¼ -inch drives and one 3½-inch d rive)
• two non-accessible hard disk drives (two 3½-inch drives w ith half installation height)
"Accessible drives" are e.g. DVD or CD RO M drives, into which a data
carrier can be inserted from outside.
An accessible 3
1
/
2
inch drive is for example a diskette drive or a multicard reader.
These drives can be used to read data storage media.
Removing and installing ac cessible drives
The number of scre ws used to attach the drives varies according to the type of
drive fit ted and may not necessarily match the depiction below.
Removing an accessible 5
1
/
4
inch drive (e.g. DVD drive)
► Open the casing (see "Opening the casin g", Page 32).
Acces sible driv e,Drive,
► Disconnect all cables connected to the drive (data cable, power supply cable).
2
1
1
► Loose n the screws (1).
► Workin
g from behind, slide the drive a s hort distance out of the bay in the direction of the arrow (2).
The drive now protrudes slightly out of the casing.
► Pull t
he drive out of the casing (2).
► If necessary, make the required settings on the remaining hard disk drive.
38 Fujitsu Technology Solutions
To Next Page
Loading...
