System expansio ns
For cooling, protection against fire, and in order to comply with EMC (electromagnetic
compatibility) regula tions, you must refit the slot cover.
2
1
► Slide the slot co
ver into the slot (1).
► Secure the slot cover in position with the screw (2).
► Secure the cove
r plate on the casing again.
► Close the c asing (see "
Closing the casing", Page 33).
If you have installed or removed a PCI board, please check the relevant PCI
slot settings in the BIOS Setup. If necessary, change the s ettings. Further
information is provided in the PCI board documentation.
Fujitsu Technology Solutions 37
To Next Page
Loading...
