Getting started
Connecting the device to the mains supply
Mainsadapter
2
1
► Connect the power cable t o the device (1).
► Plug the power plug into a grounded mains outlet (2).
Switchingonforthefirst time: installing the software
Installing,Software,Installing,
Once the installation has been started the de vice must not be switched
off, unless the installation has been completed.
During installation, the device may only be rebooted when you are requested to do so!
The installation will otherwise not be carried out correctly an d th e contents
of the hard disk must be completely restored.
If the device is integrated into a network, the user and server details as well as
the network protocol are required during the software installation.
Contact your network administrator if you have any questions about these s ettings.
When you switch on the device for the first time, the supplied software
is installed and config ured. Plan a reasonable amount of time for this,
as this process m ust not be interrupted.
You may need the licence number for Windows during the installation. The licence
number is located on a sticker on your device.
Fujitsu Technology Solutions 17
To Next Page
Loading...
