Fujitsu ESPRIMO P372 Series - Connecting a Monitor; Connecting the Mouse; Connecting the Keyboard

Getting started
Connecting a monitor
► Follow the instructions contained in the monitor manual to prepare the monitor
for ope ration (e.g . connecting cables).
Monitor
► Connect the data cable of the monitor into the monitor port of your d evice.
The monitor power cable may only be connected to the device monitor socket if
the monitor c urrent consumption is less than 1.5 A for 230 V or 3 A for 115 V.
The values for the monitor current con sump tion can be found in the technical
data on the monitor or in the operating manual for the monitor.
► Depending on the configur
ation level of your device, plug the monitor power
cable into the grounded
mains outlet.
Connecting the mouse
Depending on t he equipment level selected, your device will be supplied with
a USB mouse or a PS/2 mouse.
Mouse,Connecting,
Connecting a USB mouse
► Connect the USB mouse to one of the U SB ports on the device.
USBport,USBport
Connecting a PS/2 mouse
If you do not attach a mouse to t he PS/2 mouse port, you can disable the mouse
controller in the BIOS Setup in order to free the IRQ12 for a different application.
► Connect the PS
/2 mouse to the PS/2 mouse port of the device.
PS/2mouse,Connecting,PS/ 2 mouse,
Connecting the keyboard
Depending on t he equipment level selected, your device will be supplied with
a USB keyboard or a PS/2 keyboard.
Keyboard
,
Connecti
ng,
Connecting a USB keyboard
Use the supplied keyboard cable only.
USBport
,
Connect
ing,
► Plug the rectangular connector of the keyboard cable into the rectangular socket
on the underside or on the rear of the keyboard.
► Insert the flat rectangular USB plug of the keyboard c able into one of the d evice’s USB ports.
USBport
Connecting a PS/2 keyboard
Use the supplied keyboard cable only.
ConnectingaPS/2keyboardConnecting,
► Plug the rectangular connector of the keyboard cable into the rectangular socket
on the underside or on the rear of the keyboard.
► Plug the round plug of the keyboard cable into the keyboard port on the device.
Key
board,
Fujitsu Technology Solutions 15