System expansions
Opening the casing
Casing,Device,
► Switch the device off. The device must not be in power-saving mode.
Please observe the safety information in "Impor tant n otes", Page 7.
Disconnect the mains plug from the mains outlet.
Only insert the power plug after you have closed the casing.
► Remove a ny connected wir
es which are in the way.
► Lay the device on its side in the man ner show n below.
1
2
1
1
► Remove the casing screws (1).
► Slide the side cover from the casing in the direction of the arrow (2).
32 Fujitsu Technology Solutions
To Next Page
Loading...
