Operation
Indicators on the device
Indicators,D evice
The indicators are on the front of the casing. Which indicators are available on your
device depends on the configuration level you have selected.
3
1
2
1 = Drive indicator, e.g. DVD
2 = Po wer-on indicator
3 = Hard disk indicator
No. Ind icator Description
1 Drive indicator
The indicator lights up when the CD-ROM or DVD drive in the
device is accessed. Never under any circumstances remove the
CD/DVD while the indicator is lit.
2 Power-on indicator
Caution: When energ y saving mode is active, the device must
not be sw itched off at the main po wer switch (if present) or
disconnected from the mains, as this may result in data loss.
• The indicator is illuminated:
The device
is switched on.
•Theindicatorisflashing:
The devic
e is in energy-saving mode. After being switched on
with the O
N/OFF switch, the device powers up or returns to th e
state it w
as in before it entered energy-saving mode.
• The indicator is not lit:
The dev
ice is switched off.
3Harddi
sk indicator
The indicator lights up when the hard disk drive of the device is
accessed.
20 Fujitsu
To Next Page
Loading...
