System expansions
Installing a hard disk drive
► O pen the casing (see "Opening th e casing", Page 31).
Harddisk drive,
► Take the new hard disk drive out of its packaging.
1
2
2
2
2
► Slid e the hard disk drive into the casing (1). Make sure th at the screw holes are aligned.
► Press gently against the hard disk drive from below and secure it with the screws (2).
► Connect the cables (data cable, power supply) to the drive.
Check that the polarity is correct and do not use any force.
► Close the casing (see "
Closing the casing", Page 32).
38 Fujitsu
To Next Page
Loading...
