System expan sio ns
Installing a nd removing an accessible 3
1
/
2
inch drive
Installing an acce ssible dri
ve
► Open the casing (s ee "Open ing the casing", Page 31).
Diskette drive,Diskettedrive,
► Ifthereisanaccessible5
1
/
4
" drive, remove the drive (see "Removing
an accessible drive", Page
33).
► Remove the front panel from the c asing.
► From the inside, press th
e plastic drive cover out of the front panel.
1
► Break out the
pre-stamped metal cover on th e drive bay opening with a screwdriver (1).
► Secure the front pane l on the casing again.
2
2
1
► Slide the drive into the casing (1). Make sure that the screw holes are aligned.
► Fasten the drive into place with the screws (2).
► Plug the data and the power supply conne ctors into the drive. Make sure the polarity is correct.
Fujitsu 35
To Next Page
Loading...
