System expansions
1
► Break out the pre-stamped metal cover on the drive bay opening with a screwdriver (1).
► Secure the front panel on the casing again.
2
2
1
► Slide the
drive into the casing (1). Make sure that the screw holes are aligned.
► Fasten the drive into place with the screws (2).
► Plug the
data and the power supply connectors into the drive. Make sure the polarity is correct.
► If there is an accessible drive, please install it again.
► Close t
he casing (see "
Closing the casing", Page 32).
34 Fujitsu
To Next Page
Loading...
