Troublesho ot ing and tips
No mouse pointer displayed on the screen
Cause
Remedy
The mouse is not correctly connected.
► Shut d own the operating system properly.
► Switch the device off.
► Check th at the mouse cable is properly
connected to the syste m unit. If you use an
adapter or extension lead with the mouse
cable, check the connections.
► Switch the device on.
The mouse controller is not en abled.
► Check in the BIOS-Setup w
hether the mouse
controller is enabled.
► Check that the mouse driver is properly
installed and is present when the application
programme is started. Detailed information
can be found in the user guide for the mouse
and application programme.
Time and/or date is not correct
Cause
Remedy
Time and date are incorrect.
► Set the correct ti
me a nd date within the
operating syste
m you are using.
or
► Set the correct time and/or date in the
BIOS Setup.
The lithium battery is discharged.
► If the time and
date are repeatedly wrong
when you switc
h on your device, replace the
lithium batt
ery (see "
Repla cing the lithi um
battery", P
age 43).
Error mess
ages on the screen
Error messages and their explanations are provided:
• in the technica l manual for the mainboard
• in the doc
umentation for the programs used
Fujitsu 27
To Next Page
Loading...
