System expan sio ns
Installing and removing the accessible 5
1
/
4
inch drive
Removing an accessible drive
► Open the casing (s ee "Open ing the casing", Page 31).
Acce ssib ledr ive,Drive,
► Disconnect the cables conne
cted to the driv e.
1
1
2
► Loosen the scr
ews ( 1).
► Working fro m beh ind, slide the drive a short distance out of the bay in the direction of the arrow (2).
The drive now
protrudes slightly out of the casing.
► Pull the drive out of the casing (2).
► If necessar
y, make the r equired settings on the remaining hard disk drive.
Installing an acce ssible drive
► Open the casing (s ee "Open ing the casing", Page 31).
Diskette drive,Diskettedrive,
► If there is an accessible d rive, please remove it (see "Removing an accessible drive", Page 33).
► Remove the front panel from the c asing.
► From the inside, press th e plastic drive cover out of the front pa nel.
Fujitsu 33
To Next Page
Loading...
