A26361-K1006-Z220-1-7619, edition 2 5
Preparing for use
!
Please observe the safety information in the "
XImportant notesX" chapter.
Unpacking and checking the delivery
It is recommended not to throw away the original packaging material! It may be required for
reshipment at some later date.
► Unpack all the individual parts.
► Check the delivery for damage incurred during transportation.
► Check whether the delivery agrees with the details in the delivery note.
► Should you discover that the delivery does not correspond to the delivery note, notify your local
sales outlet immediately.
Steps for initial setup
Only a few steps are necessary to put your new device into operation for the first time:
– Select a location for device and set up device
– Connect the monitor, mouse and keyboard
– Check the voltage at the mains outlet and connect the device to an electrical outlet
– Switch the device on
You will learn more about the individual steps in the following sections.
Drives and boards
i
If you have received drives or boards with your device, please do not install them until
after first-time setup. How to install drives and boards is described in the "
XSystem
upgrades
X" chapter.
To Next Page
Loading...
