Fujitsu ESPRIMO P5635 - Installing and Removing the Hard Disk Drive; Removing a Hard Disk Drive

System upgrades
50 A26361-K1006-Z220-1-7619, edition 2
Installing and removing the hard disk drive
Removing a hard disk drive
► Open the casing (see "XOpening the casingX").
► Fold up the drive cage (see "
XOpening the drive cageX").
► Disconnect all cables connected to the drive (data cable, power supply cable).
1
2
1
► Slightly press together the EasyChange rails mounted on the hard disk (1) and pull the hard
disk drive out of the drive cage in the direction of the arrow (2).
► Pull the EasyChange rails off the hard disk
drive.
► If you no longer need the EasyChange rails,
secure them again at their location in the
drive cage.
i
It may be necessary to modify the entry for the drive in the BIOS Setup.