System upgrades
A26361-K1006-Z220-1-7619, edition 2 47
Installing and removing drives
The PC casing can accommodate a total of five drives:
● four accessible drives
(two 5 1/4 inch drives and two 3 1/2 inch drives)
● two non-accessible drives
(two 3 1/2 inch drives)
"Accessible drives" are e.g. DVD or CD ROM drives, into which a data carrier can be inserted from
outside. Non-accessible drives are e.g. hard disk drives.
Removing an accessible drive
► Open the casing (see "XOpening the casingX").
2
1
► Pull the data and the power supply connectors from the drive.
► Remove the screw (1).
► Pull the drive out of the casing in the direction of the arrow (2).
► If necessary, make the required settings on the remaining drives.
► If you do not install a new drive, secure a cover (optional) at the location so that no foreign
bodies can enter the casing.
► Close the casing (see "
XClosing the casingX").
i
It may be necessary to modify the entry for the drive in the BIOS Setup.
To Next Page
Loading...
