System upgrades
46 A26361-K1006-Z220-1-7619, edition 2
Removing an optional port
► Open the casing (see "XOpening the casingX").
► Disconnect the cables connected to the port.
1
2
► Press on the curved part of the retaining
clip (1).
► Remove the port from the slot (2).
!
For cooling, protection against fire, and in order to comply with EMC (electromagnetic
compatibility) regulations, you must refit the cover plate.
2
1
► Push the rear slot cover plate into the
slot (1). Ensure that the point of the cover
engages on the outside of the casing.
► Press on the retaining clip until it you feel it
engage (2).
► Close the casing (see "XClosing the casingX").
To Next Page
Loading...
