Preparing for use
A26361-K1006-Z220-1-7619, edition 2 15
Switching on monitor and device
► Switch the monitor on (see the operating manual for the monitor).
► Switch the device on. To do this, follow the instructions below.
i
Depending on the version, the device may be equipped with a main power switch on the
back of the device in addition to the ON/OFF button on the front. As a result, there are
different ways to switch on the two variants.
Switching on the device (with main power switch)
0
1
I
0 = Device is off
I = Device is ready-to-operate
► Switch the device on with the main power switch (1) on the back of the device.
► Press the ON/OFF switch (2) on the front of the device.
The power-on indicator lights green and the device is started.
To Next Page
Loading...
