Troubleshooting and tips
28 A26361-K1006-Z220-1-7619, edition 2
Cause Troubleshooting
Wrong monitor has been set under
Window XP
► Restart the device.
► Press F8 while the system is booting.
Either the Windows Advanced Start Options menu or the
menu for selecting the operating system appears.
► If the menu for selecting the operating system
appears, press F8 .
► Select Safe Mode or Safe Mode with Network.
► Set the correct values for the connected monitor as
described in the operating manual of the monitor by
selecting Start - Settings - Control Panel - Display and
then the Appearance, Themes, Settings tabs.
Wrong setting for the monitor under
Windows Vista
► Restart the device.
► Press F8 while the system is booting.
Either the Windows Advanced Start Options menu or the
menu for selecting the operating system appears.
► If the menu for selecting the operating system
appears, press F8 .
► Select Safe Mode or Safe Mode with Network.
► Set the correct values for the connected monitor, as
described in the operating manual of the monitor, by
selecting Start (Settings) - Control Panel - Display -
Settings.
Wrong setting for the monitor under
Windows 7
► Restart the device.
► Press F8 while the system is booting.
Either the Windows Advanced Start Options menu or the
menu for selecting the operating system appears.
► If the menu for selecting the operating system
appears, press F8 .
► Select Safe Mode or Safe Mode with Network.
► Select Start – Control Panel – Appearance and Themes
– Display to set the correct values for the connected
monitor, as explained in the monitor instructions.
The wrong RAM memory modules
have been inserted.
► See the manual for the mainboard for information on
which memory modules can be used.
To Next Page
Loading...
