System upgrades
A26361-K1006-Z220-1-7619, edition 2 41
2
1
► Push the board into the slot (1).
► Press on the retaining clip until it noticeable engages (2).
► If necessary also secure the board with a screw.
► If necessary, connect the cables to the board.
► Fold down the drive cage (see "
XClosing the drive cageX").
► Close the casing (see "
XClosing the casingX").
i
If you have installed or removed a board, please check the relevant PCI slot settings in the
BIOS Setup. If necessary, change the settings. Further information is provided in the PCI
board documentation.
Information about the installation of low profile boards can be found in the section "
XLow-
profile boards
X".
To Next Page
Loading...
