EasyManua.ls Logo

Fujitsu ESPRIMO Q7010 - Important Notes and Safety; Safety and Operational Notes; Device Handling and Care

Fujitsu ESPRIMO Q7010
66 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Important notes
Important notes
ImportantnotesNotes
In this chapter you will nd information regarding safety which it is essential to
take note of when working with your device.
Safety notes
SafetynotesNote
Please follow the safety
notes provided in the "Safety/Regulations" man ual
as well as the safety note
s given below.
When installing and ope
rating the device, please observe the notes on
ambient conditions in C
hapter "
Technical data", Page 59 an d Chapter "Getting
started", Page 17 or the no
tes in the data sheets.
The device m ay only be o
perated up to a maximum height of 3000 m
(9842 ft) (for China
only 2000 m (6557 ft)).
When setting up the d
evice, make sure there is clearance all around it so that
thecasingreceive
s enough ventilation. In order to avoid overheating, do not
cover the v enti lat
ion areas on the monitor or the device.
You should operate
the device only if the rated voltage of the device
is the same as the l
ocal mains voltage.
For complete disc
onnection from the mains voltage, you must pull
the mains plug o
ut of the s ocket.
Please note tha
t components in the system as well as the surface
of the device ma
y become very h ot.
The activitie
s described in these instructions must always be performed with special care.
Only qu ali e
d technicians should repair the device. I ncorrect repairs could put the user
at great risk
or cause s erious dama ge to the equipment (electric shock, risk of re).
Do not lay or p
lace any objects on the upper side of the device.
Do not apply
any pressure to the upper side of the device during operation.
Transport
ing the device
DeviceTran sporta tionRe-transportation
Transport all devices separately in their original packaging or in a packaging
that protects them from knocks and jolts.
Unpack them only at the installation site.
If the device is brought from a c old environment into the room where it will be used,
condensation may occur. In order to avoid damage to the device, wait before preparing
it for use until the device has reached the ambient temp erature and it is absolutely dry.
Fujitsu 15

Table of Contents

Related product manuals