Operation
Manual removal of storage media (emergency removal)
CD/DVDRemovingbyhand,CD/DVDEmergencyrem oval,CD/DVD
In the event of a power failure or damage t o the drive it may be necessary
to manually remove the CD/DVD.
1
2
► Switch your device off.
► Push a pen or a piece of wire (such as a
paper clip) firmly into the opening (1).
The drive tray is ejected. Yo u c an now pull
the dr ive tray (2) out of the drive.
Wireless LAN / Bluetooth wireless components
(device-dependent)
The installation of wireless compon ents not approved by Fujitsu w ill
invalidate the certifications issued for this device.
The operation of these wireless components is not permissible in Taiwan.
Switching the wireless components on a nd off
With the programme Device Manager you can switch off the wireless
components on or off separately.
Pay attention to the additional safety n otes for devices with wireless components
provided in the "Safety/Regulations" manual.
Details on using W ireless LAN can be found in the online help system
included with the Wireless LAN soft ware.
You can find more information on how to use B luetooth on the CD you
received with your Bluetooth software.
Fujitsu 45
To Next Page
Loading...
