Operation
► Secure the lower housing cover again, se e "System expansions and repairs" manual.
► Secure the upper housing cover again, see "System expansions and repairs" manual.
► Fold the locking latching clip fully to the right until it is lying against the rear of
the device and secure a padlock to th e padlock clamp.
Alternatively you can use a Kensington Lock cable (see "Using the security lock", Page 51
). This will prevent unauthorised opening of the latching clip and, with it, the casing cover.
Lead-sealing the casing
To prevent unauthorised persons from opening the casing, the casing can be lead-sealed.
► Use the wire of the lead-seal to connect the locking bracket with the padlock clip
on the back of the device (see chapter "
Rear", Page 11).
Lead-sealingLead-seal chainLead- seal wireMechanicallock
► Use t he seal to secure the lead-sealing c hain or wire.
Fujitsu 53
To Next Page
Loading...
