Getting started
Setting up the device
VideoworkstationErgonomicDevice
When setting u p your device, please rea d the recommendations and
safety notes in the "Safety/regulations" manual.
We recommend that you place your de vice on a surface with good anti-slip qualities.
In view of the multitude of different finishes and varnishes used on furniture, it is
possible that the rubber feet will m a rk the surface they stand on.
Depending on your device location, disturbing vibrations and noises may occur. In
order to avoid this, a minimum distance of 10 mm / 0.39 inch to other devices or
objects should be maintained on housing sides without ven tilation surfaces.
In order to avoid overheating, do not cover the ventilation areas
on the monitor or the device.
For ventilation surfaces, a minimum distance of 200 mm / 7.87 inch
from the device must be maintained.
Do not place multiple devices on one another and do not keep any monitor on the device.
Do not expose the device to extreme ambient conditions (see "
Technical data", Page 59,
"Ambient conditions"). Protect the device from dust, humidity, and heat.
Operating position
You can use the device in various operating positions.
Horizontal, top casing cover upwards
For the device variant FUJITSU Desktop ESPR IMO Q55x/Q 957/ Q95 8/Q7010, you must
stick the enclosed adhesive feet in the four corners of the underside of the d evice in
this operating position, see section "
Attach adhesive feet (optional)", P age 23.
20 Fujitsu
To Next Page
Loading...
