Getting started
In order to be ab le to mount the bottom c over prior to preparing it for use, proceed as follows:
► Turn the device over and place it on a stable, flat and c lean surface. If necessary, place a
slip-resistant cloth on this surface to prevent the device from b eing scratched.
1
1
2
► Put the bottom c over as shown on the bo ttom of the device.
► Hook the bottom cover in the openings provided for th is purpose at the botto m (1).
► Fold the cover in the direction of the arrow (2) until it engages noticeably and audibly.
Information about removing the bottom cover is provided in Section "
Remove
the bottom cover", Page 25 .
Fujitsu 19
To Next Page
Loading...
