Fujitsu ESPRIMO Q7010 - Attach Adhesive Feet (Optional)

66 pages

To Next Page

To Previous Page

Getting started

Attach adhesive feet (optional)

For the horizontal operating position, you must attach the adhesive feet to the device.

► Attach the adhesive feet to the fou r corners of the underside of the unit as show n (1).

Fujitsu 23

Main Page

Table of Contents7
Your ESPRIMO9
Validity of the Reference Manual9
Notational Conventions10
Ports and Operating Elements11
Front11
Rear15
Important Notes19
Safety Notes19
Transporting the Device19
Cleaning the Device20
Energy-Saving, Disposal and Recycling20
Important Notes for ESPRIMO Q957/Q958/Q701020
Getting Started21
Unpacking and Checking the Delivery21
Steps for Initial Setup21
Fitting the Underside Cover (Device-Dependent)22
Setting up the Device24
Operating Position24
Attach Adhesive Feet (Optional)27
Fitting the Base (Optional)28
Fitting the Device to the VESA Interface on a Monitor (Optional)29
Connecting the Power Cable36
Connecting External Devices38
Ports on the Device38
Connecting the Monitor39
Connecting a USB Mouse39
Connecting a USB Keyboard39
Connecting External Devices to the Serial Interface39
Connecting External Devices to the USB Ports40
Connecting a PS/2 Device40
Initial Switch-On: Software will be Installed41
Switch on the Monitor and the Machine41
Installing the Software42
Operation43
Switch the Device on43
Switching the Device off43
Indicators on the Device44
Keyboard45
Important Keys and Key Combinations45
Optical Drive (Device-Dependent)47
Handling Storage Media47
Inserting or Removing Storage Media48
Manual Removal of Storage Media (Emergency Removal)49
Wireless LAN / Bluetooth Wireless Components (Device-Dependent)49
Switching the Wireless Components on and off49
Settings in BIOS Setup Utility50
Starting the BIOS Setup Utility50
Operating the BIOS Setup Utility51
Shutting down the BIOS Setup Utility51
Property and Data Protection52
BIOS Setup Security Functions52
Delete Data52
Using the Smartcard Reader (Device-Dependent)52
Using a Palm Sensor (Device-Dependent)54
Using the Security Lock55
Using a Locking Slide56
Lead-Sealing the Casing57
Troubleshooting and Tips58
Help if Problems Occur58
Troubleshooting58
Power-On Indicator Remains Unlit after You Have Switched on Your Device58
The Device Cannot be Switched off with the On/Off Switch59
Monitor Remains Blank59
No Mouse Pointer Displayed on the Monitor60
Date and Time Are Not Correct60
Smartcard Reader Is Not Recognised60
Smartcard PIN Forgotten60
Smartcard Lost60
User And/Or Supervisor Smartcard Lost61
Error Messages on the Screen61
Installing New Software61
Tips61
System Expansions and Repairs62
Technical Data63
Index64

Fujitsu ESPRIMO Q7010 - Attach Adhesive Feet (Optional)

Table of Contents

Related product manuals