Operation
Settings in BIOS Setup Utility
BIOSSetupUtilitySystemsettings,BIOSSetupUtilityConfiguration,BIOSSetupUtilitySetupConfiguringthesystemConfiguringthehardware
With the help of the BIOS Setup Utility you can adjust the system functions
and the hardware configuration for your device .
When it is supplied, the device is set to factory default settings. You can chang e the se
settings in BIOS Setup Utility. Any changes you make in the settings take effect as
soon as you save and shut down the BIOS S etu p Utility.
The BIOS Setup Utility program contains the following m enus:
Menu Description
Main
System settings such as
time and date
Advanced
Advanced system setti
ngs
Boot
Configuration of the start-up sequence
Power
Power management functions
Security
Password settings
and security functions
Exit
Exits the BIOS Set
up Utility
The following function keys can also be used:
Key Description
Esc
to shut down the BIOS Setup Utility
The current settings are not saved.
F7
To discard changes and to load the previous config uration of the BIOS
Setup Utility.
F9
To lo ad t he d
efault configuration of the BIOS S etu p Utility.
F10
to shut dow
ntheBIOS Setup Utility
The curren
t settings are saved.
Startin
g t he BIOS Setup Utility
► Start the device (switch off/on or reboot the Operating System).
BIOSSetupUtility
Depend
ing on the s etting for Fast Boot in the BIOS Setup Utility the following display,
if ap pl
icable, appe ars on the screen on start-up:
<F2> BIOS Setup <F12> Boot Menu
► Press the function key
F2
.
► If a p
assword has been assigned, enter the password and press the Enter key.
If yo
u have forgotten the password, contact your system administrator
or c
ontact our customer service centre.
The BIOS Setup Utility starts.
46 Fujitsu
To Next Page
Loading...
