Operation
Indicators on the d evice
The indicators are on the front of the casing. Which indicators a re available on your
device depends on the configuration level you have selected.
Example: Device variant with Sma rtCard reader and/o r palm sen sor
321
No. indicato r Description
1
SmartCard read
er
indicator (dev
ice
dependent)
The indicator l
ights up when the device’s SmartCard reader is
accessed (devi
ce dependent).
2Harddiskindi
cator
The indicator
lights up when the hard disk drive in the device
is being acce
ssed.
3 Power indic
ator
Attention:
In the e nergy saving mode, the device must not be
disconnect
ed from th e mains, as this can result in data loss.
• Indicator
is illuminated:
The device is switched on.
• Indicato
r flashes:
The device is in energy-saving mode. After being sw itched on
with the On/Off switch, the de vice powers u p o r returns to the
state it was in before it entered energy-saving mode.
• The indi
cator is not illuminated:
The device is switched off (disconnected from the mains) or
is ready. If the device is ready it can be switched on with the
On/Off switch.
In the energy saving mode, the device must not be disconnect ed from
the mains, as this can re sult in data loss.
40 Fujitsu
To Next Page
Loading...
