2.1.2 Cable Connection
2.1.2.1 Cable Connection (Power)
When connecting the power cords (AC cables) of the enclosures to the power distribution units, make sure to
secure the necessary number of power outlets within the same rack. Avoid exceeding the power cord length
and connecting power cords to different racks.
Figure 2.1 AC Cable Connection
CE
PDU
DE
DE
DE
DE
DE
DE
Rack-1 Rack-2
:
AC cable
CE: Controller Enclosures
DE: Drive Enclosures
PDU: Power Distribution Unit
Chapter 2 Rack Installation Specifications
2.1 Rack Installation Requirements
38
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Site Planning Guide
Copyright 2014 FUJITSU LIMITED
P3AM-7712-05ENZ0