Fujitsu Eternus DX80 S2 - Power Distribution Units (2 U); Figure 2.29 Power Distribution Unit for DX80 S2;DX90 S2 (AC200-240 V, 2 U, Max 6 Enclosures Connection)

To Next Page

To Previous Page

Chapter 2 Components

2.3 Power Distribution Units (For Regions other than EMEA&I)

ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Installation-

2.3.2 Power Distribution Units (2U)

There are 2U power distribution units that can connect up to six enclosures and 2U power distribution units

that can connect up to eight enclosures.

■ Power distribution unit for DX80 S2/DX90 S2 (AC200-240V, 2U, Max 6 enclosures

connection)

There are 12 outlets.

Figure 2.29 Power distribution unit for DX80 S2/DX90 S2 (AC200-240V, 2U, Max 6 enclosures connection)

● Part explanation

• Outlet (OUTPUT)

This is a socket (IEC60320-C13) for outgoing power supply. This socket is used to connect a power cord (AC

output cable).

• Main line switch

This turns on and off the power distribution unit.

Outlets (OUTPUT)

Main line switches

Other manuals for Fujitsu Eternus DX80 S2