Fujitsu Eternus DX80 S2 - Figure 2.7 2.5 Drive; Figure 2.9 3.5 Drive; Figure 2.22 2.5 Drive; Figure 2.24 3.5 Drive

Chapter 4 Connecting Cables
4.5 Power Cord Connection
ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Installation-
Copyright 2013 FUJITSU LIMITED P3AM-4832-07ENZ0
85
The following figures show a connection diagram of AC outlet cables.
● For Power distribution unit for DX80 S2/DX90 S2 (AC200-240V, 2U, Max 6 enclosures connection)
OUT1
OUT2
OUT3
OUT4
OUT5
OUT6
OUT1
OUT2
OUT3
OUT4
OUT5
OUT6
Drive Enclosure 5
Drive Enclosure 4
Drive Enclosure 3
Drive Enclosure 2
Drive Enclosure 1
Controller Enclosure
PSU#1 InletPSU#0 Inlet
PSU#0
Inlet
PSU#1
Inlet
Power distribution unit #1
Power distribution unit #0
: Connect between the OUTn of the power distribution unit #0
and the PSU#0 inlets of the ETERNUS DX Disk storage
: Connect between the OUTn of the power distribution unit #1
and the PSU#1 inlets of the ETERNUS DX Disk storage