Fujitsu Eternus DX80 S2 - Page 98

Chapter 5 Setup
5.1 Basic Setup
ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Installation-
Copyright 2013 FUJITSU LIMITED P3AM-4832-07ENZ0
98
9 Log out from ETERNUS Web GUI.
9-1 Click the [Close] button.
Initial setup 1 is complete and the screen returns to the [Login] screen.
9-2 Close the Web browser.
10 Remove the LAN cable (for operation management) from the PC terminal and connect the
LAN cables (for operation management) of the MNT ports on Controller 0 and Controller 1 to
the network of the customer.
11 Restart the Web browser and log in to ETERNUS Web GUI with the changed IP address.
End of procedure