Fujitsu fi-4860C2

3-27
3.5 Cleaning the Discharge Brush
3
DAILY CARE
6. Pull the Brake roller unit toward you to remove it.
7. Using a dry cloth, wipe off the dust from the two discharge brushes:
one at the Pick roller side, the other at the Brake roller side.
8. Re-install the Brake roller unit in the reverse order of its removal. By
holding the bail toward you, put the Brake roller unit into bracket and
rotate down until it locks in.
Discharge brush(for Pick roller unit)
Discharge brush(for brakeroller)