fi-5120C / fi-5220C Image Scanner Operator
Guide
TROUBLE SHOOTING
CONTENTS MAP
TOP
6.3 Remedying Typical Troubles
Symptom: There is a shadow on the leading edge of the scanned images.
Back
Did you adjust the offset (starting position for
scanning the document)?
YES
Check the items in "6.4 Items to check before
contacting the dealer where you bought the
scanner" and contact the dealer or an
authorized FUJITSU scanner service provider..
NO
Adjust the offset.
Display the properties of the scanner that you
are
using on "Scanners and Cameras" in the
control
panel, then adjust the [Sub-scan Setting].
All Rights Reserved Copyright 2006-2009 © PFU LIMITED
To Next Page
Loading...
