*5
The scanning speed noted is the value when using the ADF to scan.
*6 The maximum stacking capacity varies according to the document thickness. For details, see "Chapter7 ADF AND
PAPER SPECIFICATION".
*7
The Ultra SCSI and USB 2.0 / 1.1 interfaces cannot be used at the same time.
*8 If you connect the scanner with USB 2.0, it is required that the USB port and the Hub are compliant with USB 2.0.
The scanning speed may slow down when you connect the scanner with USB 1.1. If your omputer has the
compatible USB 2.0 port, please use it.
All Rights Reserved Copyright 2006-2009 © PFU LIMITED
To Next Page
Loading...
