fi-5120C / fi-5220C Image Scanner Operator
Guide
TROUBLE SHOOTING
CONTENTS MAP
TOP
4.2 Cleaning the Flatbed [fi-5220C only] (2)
1
2
1. Open the document cover.
2. Clean the following locations using a soft cloth moistened with cleaner F1.
: Document holding pad.
: Document bed.
ATTENTION
● Do not allow moisture to get inside the device during cleaning.
● It may take long before the cleaner vaporizes if a large quantity is
used. When cleaning the scanner parts, dampen a cloth with modest
quantities of the cleaner. In addition, wipe off the cleaner completely
with a soft lint-free cloth to leave no residue on the surface of the
cleaned parts.
3. Wait for cleaned parts to dry.
4. Gently close the document cover.
To Next Page
Loading...
