13
To use FUJITSU ISIS
On the dialog box below, configure scanning set-
tings, and then click the [OK] button.
⇒ You are returned to the [Scan Settings] dialog
box.
12. Click the [Scan] button.
⇒ The document is scanned and the scanned
image is displayed in the [ScandAll PRO]
window.
If the scanned document image is displayed in the win-
dow, it means that the scanner driver is installed prop-
erly.
When you are using FUJITSU TWAIN 32,
you may see the TWAIN Driver setup dia-
log box again. If so, click the [Scan] button
on the dialog box.
To Next Page
Loading...
