EasyManuals Logo

Fujitsu FI-6000NS Getting Started Guide

Fujitsu FI-6000NS
35 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
8
3.6 Setting the DNS Server
A primary DNS and secondary DNS can be set.
1. Select the [Network Settings] tab on the top
menu.
2. Select the [DNS Server] tab on the left side
menu.
The "DNS Server" screen appears.
3. Enter the following numerical addresses:
Primary DNS
Secondary DNS
If a DNS server setting is not required, enter
"0.0.0.0".
4. Press the [OK] button.
The information entered is set.
Continue with the WINS settings.
3.7 Setting the WINS Server
A primary WINS and secondary WINS can be set.
1. Select the [Network Settings] tab on the top
menu.
2. Select the [WINS Server] tab on the left side
menu.
The "WINS Server" screen appears.
3. Enter the following numerical addresses:
Primary WINS
Secondary WINS
If a WINS server setting is not required, enter
"0.0.0.0".
4. Press the [OK] button.
The information entered is set.
ATTENTION
A Secondary DNS cannot be set
without a Primary DNS.
ATTENTION
A Secondary WINS cannot be set
without a Primary WINS.

Other manuals for Fujitsu FI-6000NS

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu FI-6000NS and is the answer not in the manual?

Fujitsu FI-6000NS Specifications

General IconGeneral
Film scanningNo
Color scanningYes
Input color depth24 bit
Maximum scan size210 x 297 mm
Optical scanning resolution600 x 600 DPI
DisplayTFT
Scanner typeFlatbed & ADF scanner
Product colorGray
Display diagonal8.4 \
Display resolution1024 x 768 pixels
Scan toE-mail, Image
Sensor typeCCD
Scan file formatsJPG, PDF, TIFF
Scanning noise level59 dB
Daily duty cycle (max)- pages
Auto document feeder (ADF) input capacity50 sheets
Minimum scan area (ADF)53 x 74 mm
ISO A-series sizes (A0...A9)A4, A5, A6, A7, A8
Maximum ISO A-series paper sizeA4
Auto Document Feeder (ADF) media weight52 - 127 g/m²
Standard interfacesEthernet, SCSI-3
Server operating systems supportedWindows 2000 Server, Windows Server 2003
Input voltage100-240 V
Power supply typeAC
AC input frequency50 - 60 Hz
Power consumption (standby)10 W
Power consumption (typical)88 W
Operating temperature (T-T)5 - 35 °C
Operating relative humidity (H-H)20 - 80 %
CertificationRoHS
Cabling technology10/100BASE-T(X)
Dimensions (WxDxH)315 x 415 x 281 mm
Networking featuresFast Ethernet
Supported network protocolsTCP/IP, DHCP, SMTP, SMB, LDAP, NTP
Weight and Dimensions IconWeight and Dimensions
Depth415 mm
Width315 mm
Height281 mm
Weight13000 g

Related product manuals