EasyManuals Logo

Fujitsu FI-6000NS Getting Started Guide

Fujitsu FI-6000NS
35 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #28 background imageLoading...
Page #28 background image
14
Appendix B Scanner Care
Cleaning Materials
* To obtain Cleaner F1, contact your FUJITSU dealer or
an authorized FUJITSU scanner service provider.
Cleaning Method
Clean the ADF with a soft cloth moistened with cleaner
F1.
Which Parts and When
Clean all parts after every 1,000 sheets scanned.
Pad assembly
Feed rollers
Pick roller
Idler rollers
Glass scanner windows
Ultrasonic sensor
For more details, refer to "5.2 Cleaning the ADF " in the
"Network Scanner fi-6000NS Operator's Guide".
Cleaning the LCD Touch Panel
To prevent the touch panel screen from becoming dirty,
it should be regularly cleaned with a soft, dry cloth.
Take care when cleaning the touch panel. It can be
easily damaged, and should never be scratched or
banged with hard objects.
Cleaning the Keyboard
To prevent the keyboard from becoming dirty, it should
also be regularly cleaned with a soft, dry cloth.
WARNING
The glass scanner windows
inside the ADF can become hot
when the scanner is used.
Before cleaning inside the
scanner or replacing any parts,
turn off the power, unplug the AC
adapter from the outlet, and wait
for at least 15 minutes.
The power does not need to be
turned off when cleaning the
feed rollers.
Cleaning
Materials
Parts No. Remarks
Cleaner F1
(or isopropyl
alcohol)
PA03950-
0352
1 bottle
Moisten the cloth with
this fluid and use to
wipe parts clean.(*)
Soft, dry cloth Any commercially available lint-free
product
ATTENTION
The scanner must be cleaned more
frequently when the following types of
documents are used:
Coated paper
Documents with large areas of printing
Chemically treated paper such as
carbonless paper
Paper containing large amounts of
calcium carbonate filler
Documents written in pencil
Documents with insufficiently fused
toner
ATTENTION
Always use a dry (not damp) cloth to
clean the screen. Do not apply Cleaner
F1.
If dust is allowed to collect and harden
around the frame of the screen, it can
cause the touch panel to malfunction.
ATTENTION
Always use a dry (not damp) cloth to
clean the keyboard. Do not apply
Cleaner F1.

Other manuals for Fujitsu FI-6000NS

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu FI-6000NS and is the answer not in the manual?

Fujitsu FI-6000NS Specifications

General IconGeneral
Film scanningNo
Color scanningYes
Input color depth24 bit
Maximum scan size210 x 297 mm
Optical scanning resolution600 x 600 DPI
DisplayTFT
Scanner typeFlatbed & ADF scanner
Product colorGray
Display diagonal8.4 \
Display resolution1024 x 768 pixels
Scan toE-mail, Image
Sensor typeCCD
Scan file formatsJPG, PDF, TIFF
Scanning noise level59 dB
Daily duty cycle (max)- pages
Auto document feeder (ADF) input capacity50 sheets
Minimum scan area (ADF)53 x 74 mm
ISO A-series sizes (A0...A9)A4, A5, A6, A7, A8
Maximum ISO A-series paper sizeA4
Auto Document Feeder (ADF) media weight52 - 127 g/m²
Standard interfacesEthernet, SCSI-3
Server operating systems supportedWindows 2000 Server, Windows Server 2003
Input voltage100-240 V
Power supply typeAC
AC input frequency50 - 60 Hz
Power consumption (standby)10 W
Power consumption (typical)88 W
Operating temperature (T-T)5 - 35 °C
Operating relative humidity (H-H)20 - 80 %
CertificationRoHS
Cabling technology10/100BASE-T(X)
Dimensions (WxDxH)315 x 415 x 281 mm
Networking featuresFast Ethernet
Supported network protocolsTCP/IP, DHCP, SMTP, SMB, LDAP, NTP
Weight and Dimensions IconWeight and Dimensions
Depth415 mm
Width315 mm
Height281 mm
Weight13000 g

Related product manuals