Chapter 6 Replacing the Consumables
Appendix
Glossary
Introduction
Index
Contents
TOP
116
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Scanner
Overview
Replacing the
Consumables
12 Plug in the power cable and turn on the scanner.
For details, refer to "1.3 Turning the Power ON/OFF" (page 23).
13 Reset the brake roller counter.
Reset the counter by performing one of the following actions:
Reset the counter in [4: Consumable counters] on the [Settings
Menu] screen of the operator panel.
For details, refer to "3.2 Settings Menu" (page 62).
Reset the counter in the Software Operation Panel.
For details, refer to "Resetting the Sheet Counters" (page 174).
To Next Page
Loading...
