How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Chapter 3 How to Use the Operator Panel
Appendix
Glossary
Introduction
Index
Contents
TOP
63
How to Load
Documents
Scanner
Overview
How to Use Settings Menu
This section explains how to use the Settings Menu of the operator panel by the following categories.
Operation Description Item User
menu
Administrator
menu
Yes: Available
-: Not Available
Checking the guidance
contents
You can check the way to reset the page counter.
For more details, refer to "Checking the Guidance
Contents" (page 66).
Guidance Yes Yes
Checking the information
flashes when there is a message for
replacing consumables/cleaning/glass cleaning/regular
maintenance.
Read the message and take measures accordingly.
For more details, refer to "Checking the Information"
(page 67).
Information Yes Yes
Operational settings You can configure various settings for operating the
scanner and using the operator panel.
For more details, refer to "Operational Settings" (page
69).
1: Pick Speed Yes Yes
5: Language Yes Yes
6: LCD Contrast Yes Yes
7: Backlight lighting time Yes Yes
8: Check LED Blink Speed Yes Yes
9: LCD Scroll Speed Yes Yes
10: Low-speed Feed Mode Yes Yes
11: Stacking Control Yes Yes
13: iMFF Setting - Yes
14: No. of Paper Feed Retries - Yes
To Next Page
Loading...
