Fujitsu FI-7600 - Page 69

How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Chapter 3 How to Use the Operator Panel
Appendix
Glossary
Introduction
Index
Contents
TOP
69
How to Load
Documents
Scanner
Overview
■Operational Settings
1 Press the [Power] button on the operator panel.
The [Ready] screen is displayed on the LCD.
2 Press the [Menu] button.
The [Settings Menu] screen is displayed on the LCD.
3 Press the [] or [] button and select a setting item, then
press the [Scan/Enter] button to confirm.
For more details about the setting items, refer to "Items Configurable
in the Settings Menu" (page 72).
The selected item is displayed on the LCD.
4 Press the [] or [] button and select a parameter, then
press the [Scan/Enter] button to confirm.
For more details about the setting parameters, refer to "Items
Configurable in the Settings Menu" (page 72).
If the [Settings Menu] screen is displayed on the LCD, it indicates
that the setup has been completed.
If the LCD displays a setting item, repeat step 4 until it shows the
[Settings Menu] screen.
2 [Menu] Button
3 []/[] Button
[Scan/Enter] Button
4 []/[] Button
[Scan/Enter] Button
1 [Power] Button
Me
n
u
Scan/Enter
C
h
e
ck
Powe
Powe
r
Stop/Clear
Me
n
u
Scan/Enter
Che
ck
Power
Stop/Clear
[fi-7600]
[fi-7700/fi-7700S]
HINT
 "*" is displayed for the factory default setting.
 When you select an item in the screen, the parameter currently
selected is highlighted.