Appendix
Chapter 1 Scanner Overview
Glossary
Introduction
Index
Contents
TOP
29
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Documents loaded in the ADF paper chute (feeder) are fed
into the ADF one by one when scanning starts.
Using the chute extension as described in the following
procedure will keep the documents straight and feed them
smoothly.
1 Pull out the chute extension.
1.7 Setting Up the ADF Paper Chute (Feeder)
HINT
Make sure you hold the scanner while pulling out the chute
extension.
To Next Page
Loading...
