EasyManua.ls Logo

Fujitsu FI-7600 - How to Load

Fujitsu FI-7600
233 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Appendix
Appendix
Glossary
Introduction
Index
Contents
210
How to Load
Documents
Scanner
Overview
TOP
*1: Long page scanning supports documents with a length of up to 5,588 mm (220 in.) when the resolution is set to 200 dpi or less.
If you split and output a scanned image of a long page document into multiple pages, a document of up to 200 m (218.8 yd.) can be scanned.
*2: When scanning plastic cards from the ADF, you can load up to 3 cards in the ADF paper chute (feeder).
*3: Values measured when the ADF is used. There is no paper weight limit when a document is scanned with the flatbed.
*4: Note that this is the hardware limitation, and the software's processing time such as data transfer time is added to the actual time of scanning.
*5: The capacity varies depending on the paper weight. For details, refer to "2.3 Documents for Scanning" (page 47).
*6: Use the USB cable that is supplied.
When connecting the USB cable to a USB hub, make sure you connect it to a USB hub that is connected to the USB port of a computer.
Connection with USB 3.1 Gen 1/USB 3.0/USB 2.0 requires the USB port and the hub to support USB 3.1 Gen 1/USB 3.0/USB 2.0. Also note that the
scanning speed slows down when USB 1.1 is used.
Flatbed
Scanning
speed
(A4 portrait)
(*4)
Binary (black & white) - 0.9 sec./sheet 300 dpi
Grayscale
Color
Loading capacity (*5) A4/Letter size documents or smaller: 300 sheets
Documents larger than A4/Letter size: 100 sheets
Paper weight: 80 g/m
2
(20 lb)
Optical resolution 600 dpi -
Output
resolution
Binary (black & white) 50 to 600 dpi, 1200 dpi 50 to 600 dpi: configurable in 1
dpi increments
1,200 dpi: created by scanner
driver
Grayscale
Color
Grayscale level 256 gradation levels 4096 gradation levels during
internal processing
Interface USB 3.1 Gen 1/USB 3.0/USB 2.0/USB 1.1 (*6) Type B
LCD Display: Monochrome FSTN
Displayed dots: 110 × 65 dots
Displayed lines: 16 × 5 (row × column)
Comes with a backlight
Item Specification Notes
fi-7600 fi-7700 fi-7700S

Table of Contents

Other manuals for Fujitsu FI-7600

Related product manuals