Chapter 8 Operational Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
193
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Operational
Settings
Low-speed Scan at Lower Resolution
[Low-speed Feed Mode]
When scanning at a lower resolution (less than 400 dpi), you
can configure the scanner to scan documents slowly
regardless of the resolution setting.
Scanning documents slowly can prevent the documents from
being damaged.
This setting is effective when you scan long page documents.
1 Start up the Software Operation Panel.
For details, refer to "8.1 Starting Up the Software Operation Panel"
(page 156).
2 From the listing on the left, select [Device Setting 2]
[Low-speed Feed Mode].
3 Select whether to disable or enable [Low-speed Feed
Mode].
HINT
This setting can also be configured with the operator panel.
To Next Page
Loading...
