How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Chapter 3 How to Use the Operator Panel
Appendix
Glossary
Introduction
Index
Contents
TOP
72
How to Load
Documents
Scanner
Overview
Items Configurable in the Settings Menu
Item Description Parameter (*1)/Value Factory
Default
(*2)
-: No parameters/values
Guidance Displays the way to reset the page counter. 1: Clear counter 1: Clear
counter
Information [Information] appears as an item in the [Settings
Menu] screen only if is flashing on the
LCD.
Message for replacing consumables/cleaning/glass
cleaning/regular maintenance
Only
displayed
when there
is
information
1: Pick Speed When multifeeds and paper jams occur frequently,
you may be able to improve the performance by
slowing down the speed in which documents are
picked or fed.
This setting can also be configured from the
Software Operation Panel.
1: Normal
2: Slow
1: Normal
2: Cleaning Use this setting when you clean the scanner.
For more details, refer to "Chapter 5 Daily Care"
(page 102).
1: Cleaning Paper
2: Roller Wipe
-
To Next Page
Loading...
